Dining Room wall 2

        The last pictures take you on site and to completion.

 

     Here you see the basic problems; existing work; large window; radiator; and walls of two different depths.  The base cabinets are in.

    The tall  wall units are in place.  It's starting to take shape.

 

    Everything is complete!  The radiator, (which isn't centered on the wall or under the window), now looks like it belongs there.  Counter is in place, the trim is in and matches the older work, and the glass doors are finished.  Looks great in the morning light.  Whew!  On to the next event............

Dining Room window wall

     This project took awhile to complete for many reasons.  The first was that the area of shelving had to match the existing section that I had made two years before.  The second problem was fitting around a large window, a radiator and uneven walls.  Added was the angles necessitated by the design.  The two sides of the window were not the same and the shelves weren't cut at a 45.   However, in all the project turned out very well and provided plenty of storage space.  Now the window and the wall are a focal point in the room.

Here are some pictures showing the progress of work.

 

The pieces are all stained and on the rack.   Second begins the hard part, dealing with all the angles pieces.

 

 

Here begins fitting doors on the base cabinets.

 

 



Building the radiator cover was tricky because you have to be able to take it out
to service the radiator.  It also had to fit perfectly under the counter.  Grill work let air circulate.

 

Not all woodworking involves making furniture.  There are infinite projects that you can be invited to do if people know you are a woodworker.  This project comes from a friend who owns pizza shops.  He is making a 28 inch pie and, of course, needs super-sized peels for getting the pies out of the oven. 

These "paddles" have to taper toward the edges so they slip easily under the pie in the oven.  When I made the first one a few months ago, I hand planed the entire surface.  This time I used a sled for my planer which gave me most of the taper I needed before  the final glue-up.  This cut my hand work in half, but it still was a bit of a job.

The final piece was 26" by 54".

My most recent event was hosting the Webelos pack 139 for a day in the wood shop. We made wood cases for  their belt loops and pins that they earned for various academic and sports activities.

The frame was made of 2 x 4 pieces and the belt loops hung on cord, stretched across two of the sides.  The pins could be stuck into the felt and cork backing. 

This picture shows the finished product and all the belt loops that the kids can earn.  It was my idea to get these boys to use as many skills as possible in constructing their cases.  Safety; sawing; measuring; marking; hammering; assembling; drilling; and careful workmanship were all necessary and they did a great job!!

 

I did the power saw cutting of the basic pieces but had them measure and mark the cuts necessary on the short sides.  They had to use a tape measure, a square and a pencil to mark the line where I was to cut.  They got a chance to at least see and hear a big power tool in operation.  I cut the short sides for them on their lines.

 

This done, the next step was to pre-drill holes for the nails for putting the four pieces together.  Each long side required four holes.  I left out one for them to drill with the drill press.  Each person then had two holes to drill.

 

 

 

 





 

The  next step was the most fun.  With the hammers they brought from home, they now had to insert nails in the drilled holes, line up the sides just right, and knock them home.  This was the part that needed the most concentration.  And it needed some parental help as "clamps".  It was a great learning and sharing experience for both parties.  We found that the concrete floor was the best place for hammering.

 

 

 

 

 

When the guys had the final square made, it was time to show the pictures of the monkeys.  I had to get picture of the kids "framed" in their projects.

 

 

 



 

 

After the basic square was made, then I asked the guys to measure for the nails needed for the strings that stetched across the frame. This was where they were to hang their belt loops. After they made their marks then it was their job to hammer in nails part way at each point, then stretch the string back and forth tightly, twisting it around each nail. To finish the job, the nails were hammered home to hold the string taut.  

 

 

 

 

Of course you learn how to pull bent nails out when you need to.



 

 

 

To finish the project they had to put on the back which was made of felt backed by a square of cork.  This gave them a nice surface to push pins into and the color made the whole work brighter.  I helped this part along by showing them how the air stapler works.

 

This is a picture of the "gang" with their final projects.  Now they can paint it or decorate the way they want.  It can stand on the table or hang on the wall to show everybody their achievements.  It was a fun project and not at all costly.  You need plenty of room with lots of work surface and nerves of steel when working with all those boys wielding hammers. 

 

 

 

 

Congratulations to the guys in Pack 139, Great job, Great projects!!!

 

 







 



 

 



 

 

 

 





 

 

 

Push stick tip #4

Building corner cabinets can be a nightmare especially when the angles are not 45.
I was trying to get corner shelves fit into this cabinet and forgot to allow for the 1/4 inch backs.  This led me to the problem of then cutting 1/4 inch off of each of the long sides on all the shelves.

To solve the problem and to keep all the good sides up I turned to my trusty push stick.  I always have a number of them with different thichness sides so I can rip narrow pieces.  This time the piece was only slightly over 1/8 inch.  The pusher that I made had 1/8 sides and so worked quite well in helping me with this task.

Take a look at how things worked out, in the video section.  The method takes careful technique.  If it doesn't feel right don't try it.  The pusher keeps the cutoff from flying up or back.

 

Here is an example of what homeowners can do to brighten a dull spot in their home. With a little help from EG Wood, this refrigerator corner is now useful and definitely brighter with the new lighting system. Here are before and after pictures.

 

 

 

     First the refrigerator was given a better home.  The exposed side was covered with nice harwood veneer to match the surrounding wood. 
     The top of the refrigerator is always a catch-all spot for "things" that can't be easily fetched unless husband gets a ladder.  So, a display shelf was the choice, created with added lighting to show off some better pieces of kitchen ware that may only be used occasionally. 
     The final step was to create a cabinet worthy of that corner.  Instead of a flimsy roll cart, a more permanent cabinet was made.  It has three functions now.  With a granite top it is part of the kitchen, a usable surface.  The doors and drawer are storage you can reach. The sides hold 20 bottles of wine.  You can use the entire cabinet for wine serving.  The granite top is unharmed by water, heat or alcohol.

Many of you woodworkers might have a workbench like mine.  My end vise has a single screw and rides on two pipe pieces.  It is a simple mechanism but when clamping anything on the corner of the vise the jaws won't remain parallel.  This idea came to me to help keep the jaws aligned when I'm using just the corner of the vise.

I made a stack of 1/4 x 2 x 3 inch pieces and used a carraige bolt and wing nut to secure them.  I then put the number of blocks in the opposite end of the vise that matches the thickness of the board I'm trying to clamp. 

  

 

Now the jaws of the vise are parallel and will hold the work solidly.

  



 

This is a creative idea for a wood push stick.  Take a wooden coat hanger and cut it in half and presto! you have two of them for price of one.  I've seen this type of stick being used to pull out oven trays, only only with a hook on the end instead of a notch.

This is a simple trick.  Anything to save your fingers.  Always use a solid push stick when working close to the blade.

Project, Torsion Box.....

The torsion box is a handy way to create a thick panel with the strength to span a large area.  Because the panel is mostly hollow, it also is very light.  It can also maintain its flatness and not flex under stress. 

The secret is in the core.  Everyone has seen the concept in the making of hollow core doors. The core is mostly made with cardboard and the doors don't really have to lay horizontally and support a lot of weight.  However, if you want to make a table or roof where strength is an issue, then try this idea and make a torsion box of your own.

The system requires three components, a core grid with a layer on top and a layer on the bottom.  Sounds simple and is.  In this project I used 1/2 in plywood for the grid with 1/4 ply for the top and bottom layers.  In the choice of materials, the factors of strength, length and lightness dictate. 

Make the grid by cutting long strips and then filling in the cross pieces with short cut-offs, or make continuous crossing strips and notch them to fit together, finger joint style.  Smaller grids make the panel heavier and larger grids are more open and make  a lighter panel.  Make the outside pieces of the whole frame, out of thicker material. 

 

The flat spots are where table legs will be added.

 

This torsion box, covered with stainless, makes a generous work station.

 

The central horizontal has to span a five foot wide TV and support the top cabinets.

 

 

Work on a solid, flat surface to attach the top with glue and screws. This will be the underside that won't be seen.  Using weight, (cement blocks, etc....) make sure of the flatness and let the glue dry.  Turn the whole thing over and add the bottom layer with glue and add weight to the top instead of screws.  Let the glue dry, sand the edges or add trim and you have a great table or whatever other use you have devised.

The two projects I've shown here are first a bakery table covered with stainless steel and secondly a cabinet for a huge TV.  Both utilize a torsion box for horizontal strength.

Push-stick tip #3

You can use this handy  push stick to quickly cut yards of moldings for any project.  First determine the lengths you need then cut wide pieces that you will need to cut strips from.  Take the wide pieces and rout or shape the molding contour on one or both edges.   Then with your handy dandy push stick you can safely cut off strips of molding as fast as you can rout them without having to change the table saw fence setting.

Some styles of moldings are round or irregular and the pusher might not make good contact.   The tip here is to take off the side of the push stick and make one thaat is thicker or thinner or just makes better contact.   Safety here comes at the end of the cut when the tendency is for the cut piece to twist or turn.  Good contact all through the cut is imperative.  It's worth the time it takes to do this for safety.  The idea that "I'm only going to make one or two pieces" can be the dangerous concept.

Super-safe table saw push stick #2

Super-safe table saw push stick #2

This push stick for the table saw is great because it prevents you from getting involved with the blade.  It is shown here being used with a newer saw with a wider fence.  As you can see all you need do is adjust the width to the dimensions of your particular fence.

The three different size side walls allow you to cut very thin strips.  You can use the pusher with the new guards and splitters in place for wider pieces.  The blade cover does prohibit cutting very thin slices.

Super-safe push stick for older table saws.

Super-safe table saw push stick.  #1

I am posting this idea for the sake of safety.  Many old table saws are still in use in cabinet shops today.  Being vintage, they don't come equipped with the newest safety features like riving knives and spreaders that prevent kick-back.  Also they lack the over the blade covers that keep your hands away from the blade.  Not everyone can or wants to upgrade their table saw's safety equipment, or buy a new saw.

I have come across a very simple idea to protect your fingers and maintain control in nearly all ripping operations on your table saw.  This push stick stradles the fence with a handle on top for control.  When you push a piece through the blade you have complete control and can't get close with your fingers.  Every saw owner can make one, even if you do have the latest model.

I have seen some woodworkers, trusting their experience, using their thumb to guide stock between the blade and the fence.  Some will hook their little finger over the fence
for better control.  This does improve your chances but  I don't want to take any chances!  I want to lower my odds of losing a finger to zero!  Have a look....

This simple "duck" push stick is like a seat belt, in that you will get used to using it.  It becomes second nature, a habit.  If anytime, this stick hits the blade you can replace it with a bright shiny new one and still order four beers with one hand.

Specimen trees in Hatboro, PA

    Here is one of the best trees in my neighborhood. Furniture in the raw. This is a tulip poplar. Poplar is easy to work with hand tools and has few knots.

     This tree you can see, has no side branches for thirty feet. This means it will produce a maximum of clear lumber.

      Growing in this spot without much competition, helped the tree to grow straight and tall without twisting and fighting for upper story light. It has fought its way to the sun by growing tall quickly, and now dominates its neighbors.